Long Stroke Vibration Shaker System Vibration Tests for Electric
and Electronic Parts
Description
Vibration test is a process of exciting or shocking some part or
device to observe its reaction in real environment. Vibration test
is widely applied in many fields, ranging from circuit board,
airplane, ship, rocket, missile, automobile, household appliance
and other industrial products.
Labtone can offer you the whole vibration and testing proposal, and
provide you with the quality certificates of products according to
national and international standards, including GB, GJB, UL, JIS,
DIN, ISO, BS, MIL, IEC and ASTM standards.
Parameters: EV203-EV220
| Model | EV203 | EV206 | EV210 | EV220 |
| Vibration Generator | VG300/40 | VG300/50 | VG1000/50 | VG2000/50 |
| Frequency(Hz) | 1-2500 | 1-3000 | 1-3000 | 1-2500 |
| Max Exiting Force(kg.f) | 300 | 600 | 1000 | 2000 |
| Max. Displacement (mmp-p) | 38 | 50.8 | 50.8 | 50.8 |
| Max. Acceleration(g) | 100 | 100 | 100 | 100 |
| Max. Velocity(cm/s) | 120 | 200 | 200 | 200 |
| Payload(kg) | 120 | 200 | 200 | 300 |
| Armature Mass(kg) | 3 | 6 | 10 | 20 |
| Armature Diameter(mm) | φ150 | φ200 | φ240 | φ320 |
| Cooling Method | Forced Air Cooling |
| Vibration Generator Weight(kg) | 460 | 920 | 1100 | 1600 |
| Vibration Generator Dimension L*W*H(MM) | 750*555*670 | 800*600*710 | 845*685*840 | 1200*870*1100 |
| Power Amplifier | Amp3k | Amp6k | Amp12k | Amp22k |
| Cooling Method | Forced Air Cooling |
| Power Amplifier Weight(kg) | 250 | 320 | 350 | 500 |
| Power Amplifier Dimension L*W*H(MM) | 800*550*1250 | 800*550*1250 | 800*550*1520 | 800*550*1520 |
Utility
Requirements | 3-phase AC380V ±10% 50Hz |
| Aggregate Capacity(KW) | 9 | 20 | 25 | 35 |
Features:
- Rugged suspension system and linear motion guiding, strong carrying
capacity, good guiding functions, high stability.
- Load center airbag with high static stiffness and low dynamic
stiffness, strong carrying capacity, perfect performance on
amplitude variation.
- High efficiency D class power switching, 3-sigma peak current, low
power consumption and minimum harmonic distortion.
- Quick self-diagnosis with safety interlock, high safety
reliability.
- Airbag shock isolation device for vibration platform without the
need of additional. foundation, perfect reproduction of vibrational
wave and reduction in vibration transmittance.
- Horizontal and vertical expansion platforms for different
applications.
- Simple controller operation.
Product Application
Vibration test is a process of exciting or shocking some part or
device to observe its reaction in real environment. Vibration test
is widely applied in many fields, ranging from circuit board,
airplane, ship, rocket, missile, automobile, household appliance
and other industrial products.Labtone can offer you the whole
vibration and testing proposal, and provide you with the quality
certificates of products according to national and international
standards, including GB, GJB, UL, JIS, DIN, ISO, BS, MIL, IEC and
ASTM standards.
Working Principle:
Our Services:
Presales:
a.Technical consultation: test method, laboratory planning and
suggestion.
b.Equipment selection: selection scheme, FAQ.
c.Product testing scheme.
In-Sales:
a.Customer communication and progress report.
b.Guidance for pre-installation preparation, equipment
commissioning and test run
c.Calibration (when Third Party’s verification is required)
After-Sales:
a.Technical training: operation of equipment, daily maintenance,
common fault diagnosis and troubleshooting.
b.Scheduled on-site service: Detection of problem as soon as
possible in order to eliminate equipment and anthropogenic hazards.
This is to ensure long term and stable equipment operation as well
as delivery of latest technical information.
c.Technical support: special paid services are provided according
to customer’s needs.
