Vibration Battery Test Equipment Vibrationt Test Machine For
IEC62133 UN38.3 Standard
Vibration battery test equipment features:
- Rugged suspension system and linear motion guiding, strong carrying
capacity, good guiding functions, high stability
- Load center airbag has high static stiffness and low dynamic
stiffness, strong carrying capacity, perfect performance on
amplitude variation
- High efficiency D class power switching, 3-sigma peak current,
provide finest power consumption and minimize harmonic distortion
- Quick self-diagnosis with safety interlock, high safety reliability
- Airbag shock isolation device for vibration platform without the
need of additional foundation, perfect reproduction of vibrational
wave and reduce vibration transmittance
- Provide horizontal and vertical expansion platform for different
application
- Simple controller operation
Specifications: EV203-EV220
| Model | EV203 | EV206 | EV210 | EV220 |
| Vibration Generator | VG300/40 | VG300/50 | VG1000/50 | VG2000/50 |
| Frequency(Hz) | 2-2500 | 2-3000 | 2-3000 | 2-2500 |
| Max Exiting Force(kg.f) | 300 | 600 | 1000 | 2000 |
| Max. Displacement (mmp-p) | 38 | 50 | 50 | 50 |
| Max. Acceleration(g) | 100 | 100 | 100 | 100 |
| Max. Velocity(cm/s) | 120 | 200 | 200 | 200 |
| Payload(kg) | 120 | 200 | 300 | 400 |
| Armature Mass(kg) | 3 | 6 | 10 | 20 |
| Armature Diameter(mm) | φ150 | φ200 | φ240 | φ320 |
| Cooling Method | Forced Air Cooling |
| Vibration Generator Weight(kg) | 460 | 920 | 1100 | 1600 |
| Vibration Generator Dimension L*W*H(MM) | 750*555*670 | 800*600*710 | 845*685*840 | 1200*870*1100 |
| Power Amplifier | Amp3k | Amp6k | Amp12k | Amp22k |
| Cooling Method | Forced Air Cooling |
| Power Amplifier Weight(kg) | 250 | 320 | 350 | 500 |
| Power Amplifier Dimension L*W*H(MM) | 800*550*1250 | 800*550*1250 | 800*550*1520 | 800*550*1520 |
Utility
Requirements | 3-phase AC380V ±10% 50Hz |
| Aggregate Capacity(KW) | 9 | 20 | 25 | 35 |
Vibration battery test equipment Applicable Standards: MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc.
Applicable Industries:
Automotive parts and systems – qualification testing
Electronic assembly, computer equipment testing
Avionics and military hardware testing
Satellite component testing
Product and package testing
General stress screening
Performance of Dynamic Shaker
The maximum acceleration level of an electromagnetic shaker is
determined by the maximum current and the loading condition. At low
frequency, displacement of moving part is limited such that the
acceleration will not reach high level. The resonance frequency of
the moving element is designed to be higher than the upper limit of
the frequency range of the shaker.
Selection of Shaker Model
To choose a suitable vibration test system, the most important
thing is to know the exciting force required to perform the
vibration test. To evaluate and calculate the exciting force, the
following data should be specified:
- Frequency (frequency range)
- Maximum Acceleration
- Maximum Displacement
- Maximum Velocity
- Specimen Mass and Fixation
The specimen fixation is selected based on the upper limit of test
frequency and specimen size, either vertical expansion platform or
horizontal slip table. Specimen mass is needed to evaluate the
required exciting force for vibration test.
Service
Pre-Sales Service
1) Technical consultation: test method, laboratory planning and
suggestion.
2) Equipment selection: selection scheme, FAQ.
3) Product testing scheme.
4) Customer communication and progress report.
After-Sales Service
1) Technical training: operation of equipment, daily maintenance,
common fault diagnosis and troubleshooting.
2) Scheduled on-site service: Detection of problem as soon as
possible in order to eliminate equipment and anthropogenic hazards.
This is to ensure long term and stable equipment operation as well
as delivery of latest technical information.
3) Technical support: special paid services are provided according
to customer’s needs.
FAQ:
How do you attach the hardware you’re testing to your shaker?
By means of a fixture, usually aluminum or magnesium for lightness
coupled with rigidity. They can be cast, or smaller fixtures
machined from solid stock. Most fixtures are welded.
How do you control shakers?
If we’re looking for resonances in the product we’re testing, we
command the shaker to shake the product at one frequency at a time
but to vary that test frequency, to sweep it over a range of
frequencies.But more realistically, we command the shaker to
vibrate randomly and to excite all the resonances
simultaneously.Control commands go into the keyboard of a
specially-programmed computer.
What are those resonances?Are they bad?
Have you ever noticed the steering wheel moving with rather large
displacement amplitude, larger than the input to the column? That
magnification is called resonance. Possibly it annoys you. There’s
a slight chance that in a few years that whipping of the steering
column might cause bending fatigue failure.When we shake an
automotive or ship or land vehicle instrument, we're looking for,
for example, portions of printed wiring boards (PWBs) responding
with greater motion than we're inputting. That flexing may damage
PWB wiring, it may damage the attached components, and it will
damage the soldered connections between components and the PWB.
Workshop:
