Mechanical Shock Test Equipment for Battery tests 150g@6ms 50G@11ms
Mechanical Shock Test Equipment Description
Our Mechanical Shock Test Equipment can generate different
waveforms by configuring different waveform generators, such as
different half-sine waveforms, sawtooth waves, and trapezoidal
waves, to meet the various needs of our customers.
Mechanical Shock Test Equipment Specification:
| Model | SKT30 | SKT50 | SKT100 | SKT200 | SKT300 | SKT600 | SKT1000 | |
| Table Size (cm) | 40 x 40 | 50 x 60 | 70 x 80 | 100 x 100 | 120 x 120 | 150 x 150 | 200 x 200 | |
| Max. Specimen Weight(kg) | 30 | 50 | 100 | 200 | 300 | 600 | 1000 | |
Max. Acceleration (G) | Half Sine | 600 | 600 | 600 | 500 | 500 | 300 | 300 | |
| Saw-tooth | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |
| Square | | 150 | 150 | 150 | 100 | 100 | 100 | |
Pulse duration (ms) | Half Sine | 30—0.5 | 30～1 | 30～1 | 30～2 | 20～3 | 20～3 | 20～3 | |
| Saw-tooth | 18～6 | 18～6 | 18～6 | 18～6 | 18～6 | 16～6 | 18～6 | |
| Square | | 30～6 | 30～6 | 30～6 | 30～6 | 30～6 | 30～6 | |
| Controller cabinet dimension(cm) | W55*D50*H80 |
| Machine weight(Kg) | 1900 | 2300 | 3200 | 4200 | 8500 | 15500 | 21500 | |
| Power supply | 3(phase) AC380V 50/60Hz Compressed air 0.5～0.8MPa |
| Standards | GB/T2423-2008 GJB1217 GJB360.23 GJB150 GJB548 MIL-STD-202F
IEC-68-2-27 MIL-STD-883E MIL-STD-810F ISTA UL |
| Model | HSKT10 | HSKT10D | HSKT15 | HSKT30 | HSKT35 |
| Table Size(mm) | 200 x 250 | 300 x 300 | 250 x 250 | 250 x 250 | 250 x 250 |
Max. Payload (kg) | 10 | 25 | 10 | 10 | 10 |
| Shock Pulse | Half Sine Wave |
| Acceleration Range(G) | 20~2000 (bare table) | 20~10000
(bare table) | 20~15000
(bare table) | 20~30000
(bare table) | 20~35000
(bare table) |
| Pulse Duration(ms) | 0.2~18 | 0.1~11 |
The shock testing system of the SKT series is mainly applicable to shock resistance tests in such fields as
electronic products, aerospace, shipping, military industry,
automotive parts, and transportation. Shock tests in the form of
the half-sine wave, final peak sawtooth wave or trapezoidal wave
shock tests can be carried out by selecting different waveform
generators.
The equipment conforms to such testing specifications as
GB/T2423-2008, GJB150, GJB360, GJB548, GJB1217, UN38.3,
MIL-STD-202F, IEC-68-2-27, MIL-STD-810F, MIL-STD-883E, etc.
Main Features
1) User-friendly touching screen operation.Half sine, square
waveform shock pulse programmers.High rigidity shock tables.
2) Half sine, square waveform shock pulse programmers.
3) High rigidity shock tables.
4) A full range of safety features.
5) Apply air and hydraulic pressurization, strong friction brake
avoiding secondary shock.
6) Apply air spring suspension, hydraulic damping shockproof
system, no shock impact on the surrounding, without foundation
Customer Services
Presales:
- Technical consultation: test method, laboratory planning, and
suggestion.
- Equipment selection: selection scheme, FAQ.
- Product testing scheme.
In-Sales:
- Customer communication and progress report.
- Guidance for pre-installation preparation, equipment commissioning
and test run.
- Calibration (when Third Party’s verification is required).
After-Sales:
- Technical training: operation of equipment, daily maintenance,
common fault diagnosis, and troubleshooting.
- Scheduled on-site service: Detection of the problem as soon as
possible in order to eliminate equipment and anthropogenic hazards.
This is to ensure long term and stable equipment operation as well
as delivery of the latest technical information.
- Technical support: special paid services are provided according to
the customer’s needs.
Workshop :
